Mobile Service · Las Vegas

Paint Correction in Las Vegas

Paint correction is machine polishing that levels a thin layer of clear coat to remove swirl marks, wash scratches, hard-water etching, and sun haze, so the paint reflects cleanly again. We come to you anywhere in the Las Vegas Valley, measure your paint before we cut it, and recommend the lightest stage that clears the defects your car actually has.

$349–$1,899

Written byShawn Sarbacker

Quick Answer

Paint correction in Las Vegas costs $349 for a single-stage (stage 1) polish, $699 for a two-stage (stage 2) correction, and $1,199–$1,899 for a multi-stage (stage 3) correction, depending on vehicle size and paint condition. It's fully mobile: we come to your home or office, take paint-depth readings, and run a test spot before recommending the lightest stage that clears your defects.

How much does paint correction cost in Las Vegas?

Paint correction is priced by stage, and each stage is a different amount of machine work. These are our published prices. The stage you need is set by how deep your defects are and how much clear coat you have, not by which package sounds best.

StagePriceRemovesTypical timeBest for
Stage 1 · Single-stage polish$349Light swirls, wash marring, haze, buffer trailsAbout half a dayNewer or well-kept paint, and prep before a sealant or coating
Stage 2 · Two-stage correction$699Deeper wash scratches, moderate water-spot etching, light oxidationMost of a dayThe typical Las Vegas daily driver a few years into swirls and hard-water spots
Stage 3 · Multi-stage correction$1,199–$1,899Heavy swirling, isolated deep scratches, severe etching and sun-faded oxidationOne to two full daysNeglected or older paint, and only when the depth readings say the clear can take it

Stage 3 lands inside its range based on vehicle size and paint condition. We confirm the stage and the price after the depth readings and test spot, before the full car is polished. If you're planning a ceramic coating anyway, every tier ($1,199 for 3-year, $1,499 for 5-year, $1,999 for 10-year) already includes correction, so you don't pay for it twice.

Full paint correction cost breakdown →Stage 1 vs 2 vs 3, explained →

Who paint correction is for

Black and dark-colored cars where every swirl shows up in direct sun
Daily drivers a few years into automatic car washes, dusty wipe-downs, and hard-water spots
Anyone about to add a sealant or ceramic coating who wants clean paint locked in, not swirls
Owners getting a car they're keeping ready for the next several years of desert sun
Cars headed for a private sale where the paint is the first thing a buyer judges
Newer cars with light marring from washing that wasn't done carefully

Why it matters

Desert sun dulls unprotected clear

Las Vegas UV oxidizes clear coat that has nothing on it, and dark paint shows it first as haze and a chalky, flat reflection. Correction removes the damaged surface layer; protection on top slows it coming back.

Lake Mead hard water etches hot panels

Valley water is mineral-heavy, and sprinkler overspray or a rinse left to dry on a hot hood leaves rings that washing won't lift. Once they've etched in, they need a compounding step, which is why water spots push many cars from stage 1 to stage 2.

Freeway dust turns into swirls

I-15 and 215 commutes coat the car in fine grit and road debris. Wiping that off dry, or running through a brush wash, drags it across the paint and leaves the cobweb swirls you see in the sun.

A coating locks in whatever is under it

Ceramic coatings are optically clear. Coat over swirls and you preserve the swirls for years. Correct first and the coating holds the finish you actually want.

Process

How paint correction works

  1. 1

    Look at the paint in real light

    We walk the car in direct sun and under an inspection light, run a fingernail across the scratches you care about, and feel the roof and hood for bonded water spots. A scratch that doesn't catch a nail usually polishes out; one that catches needs more cut, or may be past what polishing can fix.

  2. 2

    Take paint-depth readings

    A paint-depth gauge tells us how much film is on each panel. Thin or previously polished panels cap how hard we can safely cut, no matter how bad the defects look. Factory clear coat is only about 1.5–2.0 mils thick, and what we remove doesn't grow back.

  3. 3

    Wash and decontaminate

    Iron remover and a clay bar pull bonded contaminants out first. Polishing over grit and iron drives it into the paint, so decontamination happens before any machine work.

  4. 4

    Run a test spot

    We correct a small section with the lightest pad and polish combination that might work, then check it. If it clears the defects, that's the stage. You approve the stage and the price before we polish the whole car.

  5. 5

    Correct panel by panel

    Trim and edges are taped, and each panel is polished in overlapping passes and re-checked under the light. Edges and body lines get extra care because the clear is thinnest there.

  6. 6

    Wipe down and talk protection

    A panel wipe strips polishing oils so you see the true finish. Then we go over aftercare and whether a sealant or ceramic coating makes sense, because corrected paint left bare starts collecting new swirls with the next careless wash.

When is paint correction the wrong spend?

We would rather talk you out of a correction than sell one that doesn't pay off. Skip it, or scale it back, in these cases:

  • You're returning a lease in a few months. Correction won't change lease-end charges and you won't get the money back. A good detail is the smarter spend.
  • The clear coat is peeling, flaking, or turning milky. That's clear-coat failure, not a defect, and polishing it speeds the failure up. That car needs a body shop.
  • The scratch shows primer, metal, or missing color. Polishing levels clear coat; it can't put paint back. That's a body-shop repair.
  • The depth readings come back thin. If a car has been cut hard before, the honest answer is a light one-step or nothing at all.
  • You're selling a mainstream car soon. A $1,199–$1,899 multi-stage correction rarely comes back in a private sale. A wash and a stage 1 polish photographs well for far less.
  • You were going to coat it anyway. Every ceramic coating tier includes correction, so book the coating instead of buying correction separately.

Paint correction vs repainting a scratch →

Common Questions

Paint Correction FAQ

Paint correction in Las Vegas costs $349 for a single-stage (stage 1) polish, $699 for a two-stage correction, and $1,199–$1,899 for a multi-stage (stage 3) correction with Aqualine Performance. Where a stage 3 lands in that range depends on vehicle size and paint condition, and we confirm the price after paint-depth readings and a test spot, before the full car is polished.

Ready to talk?

We'll quote your exact project, walk you through the process, and tell you honestly whether paint correction is the right fit.

5.0★ across 98+ Google reviews · BBB-accredited · we come to you, Las Vegas Valley-wide.

Explore our core services: mobile detailing, ceramic coating & PPF, and commercial fleet programs.